H3C Technologies H3C SecPath F1000-E - Manual (Page 894)

29
Configuring the Best Performing Link Function
Configuring dynamic best performing link parameters
Select High Reliability > Load Balance > Link Load Balance > Best-Performing Link from
the navigation tree, and you will enter the Parameters of Dynamic Best-Performing Link tab
page, as shown in
Figure 29 .
Figure 29 Best performing link parameters
Table 11 shows the configuration items for configuring dynamic best performing link parameters.
Table 11 Configuration items for configuring dynamic best performing link parameters
Item Description
Mask Length
Mask length of the dynamic best performing link entry generated based on the best
performing link algorithm
If you select Natural Mask, the mask length of the generated dynamic best
performing link entry is determined by the IP address of the entry.
• If the IP address is a class A address, the mask length is 8.
• If the IP address is a class B address, the mask length is 16.
• If the IP address is a class C, class D, or class E address, the mask length is 24.
Aging Time
Aging time of the dynamic best performing link entry
After a dynamic best performing link entry is generated, if no matched traffic passes
within the aging time, the dynamic best performing link entry will be deleted; static best
performing link entries do not age out.
RTT Weight Round trip time (RTT) weight in the dynamic best performing link algorithm