H3C Technologies H3C SecPath F1000-E - Manual (Page 127)

3
Creating a Zone
Select Device Management > Zone from the navigation tree to enter the page as shown in Figure
2 . Click Add to enter the page for creating a zone, as shown in Figure 3 .
Figure 2 Zone
Figure 3 Create a zone
Table 2 describes the configuration items for creating a zone.
Table 2 Configuration items for creating a zone
Item Description
Zone ID Sets the zone ID.
Zone Name Sets the zone name.
Preference
Sets the preference of a zone.
By default, packets from a high priority zone to a low priority zone are allowed to
pass.
Share Sets whether the specified zone can be referenced by other virtual devices.