H3C Technologies H3C SecPath F1000-E - Manual (Page 567)

3
Task Remarks
Configuring Basic Session Management Settings
Optional.
Basic session management settings include:
• Configuring whether to enable unidirectional
traffic detection
• Configuring long-term session rule, which is
available only for TCP sessions in the
ESTABLISHED state.
• Configuring aging times for protocol states, which
are effective only for sessions being established
• Configuring aging times for application layer
protocols, which are effective only for the sessions
in the READY or ESTABLISHED state.
Displaying and maintaining session management information
Task Remarks
Displaying Session Table Information
Display the session table information of the current
virtual device.
Displaying session statistics
Task Remarks
Displaying Global Session Statistics Display the global session statistics.
Enabling/Disabling Session Statistics Collection
Enable or disable session statistics collection based
on source/destination security zone or
source/destination IP address.
By default, the session statistics collection function is
disabled.
IMPORTANT:
The session statistics collection function collects
only information about traffic occurring during the
function is enabled.