H3C Technologies H3C SecPath F1000-E - Manual (Page 234)

3
Task Remarks
Enabling the DHCP Server on
an Interface
Optional
With the DHCP server enabled on an interface, upon receiving a client’s
request, the DHCP server will assign an IP address from its address pool to
the DHCP client.
With DHCP enabled, interfaces work in the DHCP server mode.
IMPORTANT:
z An interface cannot serve as both the DHCP server and the DHCP
relay agent. The latest configuration takes effect.
z The DHCP server works on interfaces with IP addresses manually
configured only.
Enabling DHCP
Select Network > DHCP > DHCP Server from the navigation tree to enter the page shown in Figure
4 . Enable or disable DHCP on the upper part of the page.
Figure 4 DHCP configuration page
• Click on the Enable radio button to enable DHCP globally.
• Click on the Disable radio button to disable DHCP globally.
Return to DHCP Server Configuration Task List .