H3C Technologies H3C SecPath F1000-E - Manual (Page 338)

12
• Select Network > Routing Management > BGP from the navigation tree of Device B and
make the following configurations in Figure 15 .
• Select the Enable BGP check box.
• Type 65009 for AS.
Figure 15 Enable BGP
• Click Apply. After you enable BGP, the following figure is displayed.
Figure 16 The web page displayed after you enable BGP
• Click Add in the Peer Configuration field and make the following configurations as shown in
Figure 17 .
• Type 9.1.1.2 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.