H3C Technologies H3C SecPath F1000-E - Manual (Page 881)

16
Figure 16 Real service
TIP:
To view the configuration and statistics information of a real service, click the Real Service Name link of the
real service.
Figure 17 Create a real service
Table 4 describes the configuration items for creating a real service.
Table 4 Real service configuration items
Item Description
Real Service Name Set a real service name, which uniquely identifies a real service.
Real Service IP Specifies the IP address of a server or network device that processes services.
Port
Set a port number that is related to the following parameters:
• Health monitoring method for a service group: If the health monitoring
type is TCP, then the port number is used for TCP health monitoring.
• Forwarding mode for a virtual service: If the forwarding mode is set to
NAT, then the port number is taken as the destination port of a packet
after NAT translation, and the port number must be consistent with that of
the server; if the forwarding mode is set to direct routing or firewall
forwarding, the port number is used only for health monitoring.