H3C Technologies H3C SecPath F1000-E - Manual (Page 551)

43
• Select Firewall > QoS > Classifier from the navigation tree, and click Add. Perform
configuration on the page shown in Figure 54 .
Figure 54 Create a class named classifier_1
• Type classifier_1 as the classfier name.
• Click Apply.
• Click the icon corresponding to classifier_1 on the classifier list, and click Add. Perform
configuration on the page shown in Figure 55 .
Figure 55 Configure rules for class af11_class
• Select the ACL option, and then select 3000 from the drop-down list.
• Click Apply.
Step3 Configure traffic behaviors
# Create a behavior named behavior_1, and configure the packet filtering action for the behavior to
drop packets.
• Select Firewall > QoS > Behavior from the navigation tree, and click Add. Perform
configuration on the page shown in
Figure 56 .
Figure 56 Create a traffic behavior named behavior_1