H3C Technologies H3C SecPath F1000-E - Manual (Page 415)

7
Table 3 RADIUS configuration steps
Task Remarks
Configuring the RADIUS Servers
The authentication server configuration is required while the
accounting server configuration is optional.
This section describes how to specify the primary and the secondary
RADIUS authentication/accounting servers.
By default, no server is specified.
IMPORTANT:
It is recommended to configure only the primary RADIUS
authentication/accounting server if no backup is needed.
Configuring RADIUS Parameters
Optional
This section describes how to configure the parameters that are
necessary for information exchange between the device and RADIUS
server.
Configuring the RADIUS Servers
From the navigation tree, select User > RADIUS > Server Configuration to enter the RADIUS server
configuration interface, as shown in
Figure 5 .
Figure 5 RADIUS server configuration
Table 4 lists the RADIUS server configuration items.
Table 4 RADIUS server configuration
Item Description
Server Type
Type of the RADIUS server to be configured, including Authentication Server
and Accounting Sever