H3C Technologies H3C SecPath F1000-E User Manual
Page 538
30
•
Click Apply.
# Configure class classifier_mserver to match packets based on ACL 3001.
•
Select Firewall > QoS > Classifier from the navigation tree and then click Add. Perform
configuration on the page shown in
.
•
Type the class name classifier_mserver.
•
Click Apply.
•
Select classifier_mserver in the classifier list and click its icon. Click Create, and perform
configuration on the page shown in
.
•
Select the ACL option and select ACL 3001.
•
Click Apply.
# Configure class classifier_fserver to match packets based on ACL 3002.
•
Select Firewall > QoS > Classifier from the navigation tree and then click Add. Perform
configuration on the page shown in
.
•
Type the class name classifier_fserver.
•
Click Apply.
•
Select classifier_fserver in the classifier list and click its icon. Click Create, and perform
configuration on the page shown in
.
•
Select the ACL option and select ACL 3002.
•
Click Apply.
Step3
Configure traffic behaviors
# Configure traffic behavior behavior_dbserver to mark packets with local precedence 4.
•
Select Firewall > QoS > Behavior from the navigation tree and then click Add. Perform
configuration on the page shown in
.
Figure 34 Create traffic behavior behavior_dbserver
•
Type the behavior name behavior_dbserver.
•
Click Apply.
•
Click the icon corresponding to behavior_dbserver in the traffic behavior list, and perform
configuration on the page shown in
.