H3C Technologies H3C SecPath F1000-E User Manual
Page 365
9
•
After logging into the Web interface of Device A, select Network > Routing Management >
Multicast Routing from the navigation tree to enter the Global Configuration page, as
shown in
.
Figure 8 Enable IP multicast routing
•
Select Enable from the drop-down list to enable multicast routing.
•
Click Apply.
•
Select Network > Routing Management > PIM from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page, as shown
in
.
Figure 9 Enable PIM-DM
•
Specify the working mode PIM-DM and click Apply.
•
Click the icon corresponding to GigabitEthernet 0/0 to enter its configuration page.
•
Specify the working mode PIM-DM and click Apply.
•
Select Network > Routing Management > IGMP from the navigation tree to enter the
Interface Configuration page.
•
Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page, as shown
in
.
Figure 10 Enable IGMP
•
Select Enable from the drop-down list to enable IGMP.
•
Specify the IGMP version to 2.