H3C Technologies H3C SecPath F1000-E - Manual (Page 660)

2
Task Remarks
Configuring QoS
Required
By referencing the protocol groups in QoS classes,
you can leverage the QoS traffic control function to
limit or block the identified P2P traffic.
To configure QoS, select Firewall > QoS from the
navigation tree. For more information about QoS, see
QoS Configuration.
Viewing Traffic Statistics
Optional
View the P2P traffic statistics information in each
security zone.
Loading Signature Files
Select Identification > P2P Identify > File Load from the navigation tree to enter the page shown
in Figure 1 .
Figure 1 Load a signature file
Select or enter the name of a signature file to be loaded and then click Load.
After successfully loading the signature file, you can see the following information:
• The signature file name is displayed in the Please enter or select a file name field. It is blank
when no file is loaded.
• In the Protocol(s) Load area, the protocols and the control level information contained in the
loaded signature file are listed. Table 2 shows the detailed descriptions about the control levels.
Return to P2P traffic control configuration task list .
Enabling Protocol Identification
Select Identification > P2P Identify > Protocol Identify to enter the page shown in Figure 2 .