H3C Technologies H3C SecPath F1000-E - Manual (Page 599)

7
Figure 6 Interzone policy group list
Figure 7 Interzone policy group configuration page
Table 3 describes the configuration items for configuring an interzone policy group.
Table 3 Interzone policy group configuration items
Item Description
Source Zone Specify the source zone for the interzone policy group.
Dest Zone Specify the destination zone for the interzone policy group.
Selected ACLs
Select the ACLs to be referenced by the interzone policy group.
The selected ACLs are listed in the order they are selected, which is also the match order.
An ACL listed earlier has a higher priority, and is matched earlier.
IMPORTANT:
For any ACL referenced by an interzone policy group, only the five tuples (source IP
address, destination IP address, source port, destination port, and protocol type) are
used.
Enable Select this check box to enable interzone policy group settings.
Return to
Interzone policy configuration task list .