H3C Technologies H3C SecPath F1000-E - Manual (Page 405)

3
Configuration procedure
# Configure the IP address of the interface and the zone to which it belongs. (Omitted)
# Configure local user Emily, with the privilege level Monitor and service type Telnet.
• Select User > Local User in the navigation tree and then click Add, as shown in Figure 4 .
Figure 4 Create a local user
• Type Emily as the username.
• Select Monitor as the user privilege level.
• Select Telnet as the service type.
• Type aabbcc as the password.
• Type aabbcc as the confirm password.
• Click Apply.