H3C Technologies H3C SecPath F1000-E - Manual (Page 553)

45
Figure 58 Configuration progress dialog box
• When OK appears, click Close.
Step4 Configure a QoS policy
# Create a policy named policy, and configure class-behavior associations in the policy.
• Select Firewall > QoS > Policy from the navigation tree, and click Add. Perform configuration
on the page shown in Figure 59 .
Figure 59 Create a policy named policy
• Type policy as the policy name.
• Click Apply.
• Select policy from the Policy Name drop-down list and then click Add Relation. Perform
configuration on the page shown in Figure 60 .
Figure 60 Configure class-behavior associations for the policy named policy
• Select classifier_1 from the Classifier Name drop-down list.