N in, Figure 38 – H3C Technologies H3C SecPath F1000-E User Manual
Page 541
33
Figure 38 Configure class-behavior associations for policy policy_server
•
Select class_dbserver in the Classifier Name drop-down list.
•
Select behavior_dbserver in the Behavior Name drop-down list.
•
Click Apply.
•
Select policy_server from the Policy Name drop-down list above the policy list and then click
Add Relation. Perform configuration on the page shown in
.
•
Select class_mserver in the Classifier Name drop-down list.
•
Select behavior_mserver in the Behavior Name drop-down list.
•
Click Apply.
•
Select policy_server from the Policy Name drop-down list above the policy list and then click
Add Relation. Perform configuration on the page shown in
.
•
Select class_fserver in the Classifier Name drop-down list.
•
Select behavior_fserver in the Behavior Name drop-down list.
•
Click Apply.
Step5
Apply the policy to an interface
# Apply policy policy_server to the outgoing packets of GigabitEthernet 0/2.
•
Select Firewall > QoS > Apply from the navigation tree and then click Apply Policy. Perform
configuration on the page shown in
.
Figure 39 Apply policy policy_server to the outgoing packets of GigabitEthernet 0/2
•
Select interface GigabitEthernet 0/2 in the Interface Name drop-down list.
•
Select policy_server in the Policy Name drop-down list.
•
Select Outbound in the Direction drop-down list.
•
Click Apply.