Verification – H3C Technologies H3C SecPath F1000-E User Manual
Page 827
19
•
Type 1 as the IP address pool number.
•
Type the start IP address 192.168.0.2.
•
Type the end IP address 192.168.0.100.
•
Click Apply to finish the IP address pool configuration and return to the L2TP group configuration
page.
•
Select pool1 from the User Address drop-down list.
•
Select Enable from the Assign Address Forcibly drop-down list.
shows the L2TP
group configuration page after the above configurations.
•
Click Apply.
Figure 18 L2TP group configurations
Verification
# On the user host, initiate an L2TP connection to the LNS. The host will obtain an IP address
(192.168.0.2) and will be able to ping the private address of the LNS (192.168.0.1).
# On the LNS, select VPN > L2TP > Tunnel Info from the navigation tree. Information of the
established L2TP tunnel should appears, as shown in Figure 19.