H3C Technologies H3C SecPath F1000-E - Manual (Page 254)

8
address of GigabitEthernet 0/2 is 10.1.1.2/24 that connects to the DHCP server whose IP address is
10.1.1.1/24.
Device A forwards messages between DHCP clients and the DHCP server.
Figure 24 Network diagram for DHCP relay agent configuration
Configuration procedure
Step1 Specify IP addresses for interfaces and create security zones (omitted)
Step2 Configure the DHCP relay agent
# Enable DHCP.
• Select Network > DHCP > DHCP Relay from the navigation tree and perform the following
configuration, as shown in Figure 25 .