beautypg.com

Basic configuration wizard, Overview, Basic configuration – H3C Technologies H3C SecPath F1000-E User Manual

Page 41: Launching the basic configuration wizard

background image

1

Basic Configuration Wizard

Overview

The basic configuration wizard helps you complete the following configurations easily:

Basic information: Modify the system name and the password of the current user.

Service management: Specify whether to enable the services like FTP, telnet, HTTP, and HTTPS, and
set port numbers for HTTP and HTTPS.

Interface IP address: Configure IP addresses for Layer 3 Ethernet interfaces and VLAN interfaces.

NAT: Configure dynamic NAT, internal server translation, and related parameters.

For the detailed introductions of the previous configurations, see the related parts in the Firewall Web

Configuration Manual.

Basic Configuration

Launching the Basic Configuration Wizard

Select Wizard from the navigation tree to enter the Configuration Wizard page, and then click the
Basic Device Information hyperlink to enter the first page of the basic configuration page, as shown
in

Figure 1

.

This manual is related to the following products: