H3C Technologies H3C SecPath F1000-E - Manual (Page 394)

4
Actions (in the inbound direction)
Port type
Untagged frame Tagged frame
Actions (in the outbound
direction)
Hybrid
Send the frame if its VLAN is
carried on the port. The
frame is sent with the VLAN
tag removed or intact
depending on your
configuration.
Configuring a VLAN
Configuration Task List
Perform the tasks in Table 1 to configure a VLAN:
Table 1 VLAN configuration task list
Task Remarks
Creating a VLAN Required
Modifying a VLAN
Modifying a Port
Required
Select either task
Configure the untagged member ports and tagged member ports of the VLAN, or
remove ports from the VLAN.
Creating a VLAN
Select Network > VLAN > VLAN from the navigation tree to enter the page as shown in Figure 4 .
Figure 4 VLAN configuration page
Click Add to enter the page for creating a VLAN, as shown in
Figure 5 .