Configuration guidelines – H3C Technologies H3C SecPath F1000-E User Manual
Page 493
15
Figure 15 Associate HTTP service with ACL 2000
•
Click the + sign before HTTP to expand the configuration area.
•
Type 2000 in the ACL text box.
•
Click Apply.
Configuration Guidelines
When configuring an ACL, note that:
1.
You cannot create a rule with, or modify a rule to have, the same permit/deny statement as an
existing rule in the ACL.
2.
You can only modify the existing rules of an ACL that uses the rule order of config. When
modifying a rule of such an ACL, you may choose to change just some of the settings, in which
case the other settings remain the same.
3.
If you enable ACL acceleration for an ACL and then modify the ACL, the ACL acceleration feature
still matches packets based on the original configurations. Therefore, it is not recommended to
modify an ACL after enabling ACL acceleration for it.