H3C Technologies H3C SecPath F1000-E - Manual (Page 560)

5
Item Description
Shared Bandwidth
Specify that the traffic of all IP addresses in the
specified IP address set shares the remaining
bandwidth.
This item is available when you select Enable from
the Limit Rate Per IP Address drop-down list.
Return to
Traffic policing configuration task list .
Applying a CAR List to an Interface
Select Firewall > Traffic Policing > Apply from the navigation tree to enter the page for displaying
the CAR lists applied to interfaces, as shown in
Figure 4 . Click Apply Policy to enter the page for
applying a CAR list to an interface, as shown in Figure 5 .
Figure 4 CAR lists applied to interfaces
Figure 5 Apply a CAR list to an interface
Table 3 describes the configuration items of applying a CAR list to an interface.