H3C Technologies H3C SecPath F1000-E - Manual (Page 598)

6
Note that:
• If you type 65535, the rule is placed at the end of all the rules.
• If the target ID you type does not exist, the rule is placed before the rule whose ID is the least one
greater than the target ID.
Return to Interzone policy configuration task list .
Exporting and importing configuration
Select Firewall > Security Policy > Interzone Policy from the navigation tree to enter the interzone
policy rule list page, as shown in Figure 1 .
• Click Export to bring up the dialog box as shown in Figure 4 . Choose the types of configurations
you want to export by selecting the check boxes, and then click Apply. On the pop-up dialog box,
click Save. Then set the path and name of the file for saving the configurations on the local host,
and click Save to export the selected configurations to the file.
Figure 4 Export configurations
• Click Import to bring up the dialog box as shown in Figure 5 . Click Browse, and then choose the
configuration file and click Apply to import all configurations in the file.
Figure 5 Import configurations
Return to
Interzone policy configuration task list .
Configuring an Interzone Policy Group
Select Firewall > Security Policy > Interzone Policy Group from the navigation tree to enter the
interzone policy group list page, as shown in
Figure 6 . Then click Add to enter the interzone policy
group configuration page, as shown in Figure 7 .