H3C Technologies H3C SecPath F1000-E User Manual
Page 241
10
Figure 10 Create a static address pool
•
Type static-pool for IP Pool Name.
•
Type 10.1.1.5 for IP Address.
•
Type 255.255.255.128 for Mask.
•
Type 000f-e200-0002 for Client MAC Address.
•
Type 10.1.1.126 for Gateway Address.
•
Type 10.1.1.2 for DNS Server Address.
•
Click Apply.
# Enable the DHCP server on GigabitEthernet 0/1. With DHCP enabled, interfaces work in the DHCP
server mode.
•
In the Interface Configuration field, click the
icon next to GigabitEthernet 0/1 and
perform the following configuration, as shown in
.
Figure 11 Enable DHCP server on interface GigabitEthernet 0/1
•
On the DHCP Server Interface Config page, click on the Enable radio button.
•
Click Apply.
This manual is related to the following products: