H3C Technologies H3C SecPath F1000-E - Manual (Page 44)

4
Figure 3 Basic configuration wizard: 3/6 (service management)
Table 2 describes the service management configuration items.
Table 2 Service management configuration items
Item Description
FTP
Specify whether to enable FTP on the device.
Disabled by default.
Telnet
Specify whether to enable telnet on the device.
Disabled by default.
HTTP
Specify whether to enable HTTP on the device, and set the HTTP port number.
Disabled by default.
IMPORTANT:
z If the current user has logged in to the web interface through HTTP, disabling
HTTP or modifying the HTTP port number will result in disconnection with the
device; therefore, perform the operation with caution.
z When you modify a port number, ensure that the port number is not used by
another service.