H3C Technologies H3C SecPath F1000-E - Manual (Page 141)

7
Figure 9 Create VD_B
• Type virtual device ID 3.
• Type virtual device name VD_B.
• Click Apply.
Step2 Add interfaces to the virtual devices.
• Select Device Management > Virtual Device > Interface from the navigation tree to enter
the page shown in
Figure 10 .
Figure 10 Add interfaces to VD_A and VD_B
• Find GigabitEthernet 0/1 in the Interface Member column and select VD_A from the
corresponding Virtual Device drop-down list.
• Find GigabitEthernet 0/2 from the Interface Member column and select VD_B from the
corresponding Virtual Device drop-down list.
• Click Apply.
Step3 Add VLAN members to the virtual devices.
# Add VLAN members to VD_A.
• Select Device Management > Virtual Device > VLAN from the navigation tree to enter the
page shown in
Figure 11 .