H3C Technologies H3C SecPath F1000-E User Manual
Page 540
32
•
After OK appears, click Close.
# Configure traffic behavior behavior_mserver to mark packets with local precedence 3.
•
Select Firewall > QoS > Behavior from the navigation tree and then click Add. Perform
configuration on the page shown in
.
•
Type the behavior name behavior_mserver.
•
Click Apply.
•
Click the icon corresponding to behavior_mserver in the traffic behavior list, and perform
configuration on the page shown in
.
•
Select the Dot1p option, and then select 3 in its drop-down list.
•
Click Apply. The configuration progress dialog box as shown in
appears.
•
After OK appears, click Close.
# Configure traffic behavior behavior_fserver to mark packets with local precedence value 2.
•
Select Firewall > QoS > Behavior from the navigation tree and then click Add. Perform
configuration on the page shown in
.
•
Type the behavior name behavior_fserver.
•
Click Apply.
•
Click the icon corresponding to behavior_fserver in the traffic behavior list, and perform
configuration as shown in
.
•
Select the Dot1p option, and then select 2 in its drop-down list.
•
Click Apply. The configuration progress dialog box as shown in
appears.
•
After OK appears, click Close.
Step4
Configure a policy
# Create QoS policy policy_server, and configure class-behavior associations for the policy.
•
Select Firewall > QoS > Policy from the navigation tree and then click Add. Perform
configuration on the page on the page shown in
.
Figure 37 Create policy policy_server
•
Type the policy name policy_server.
•
Click Apply.
•
Select policy_server from the Policy Name drop-down list above the policy list and then click
Add Relation. Perform configuration on the page shown in
.