H3C Technologies H3C SecPath F1000-E - Manual (Page 903)

38
Item Remarks
Persistence Timeout
Allows you to set the aging time of a persistence entry.
When a persistence method is configured, persistence entries are generated according
to the persistence method. If a persistence entry is not matched within the persistence
timeout time, the persistence entry is aged out.
This item cannot be set if you do not select a persistence method.
Connection Limit Maximum number of concurrent connections of a virtual service
Logical Link Group The logical link group referenced by a virtual service
Enable Virtual
Service
Whether to enable virtual service after it is configured
Enable Policy
Whether to enable the ACLs specified in the logical links in the referenced logical link
group
Enable
Best-Performing Link
Whether to enable best performing link
Return to
Outbound link load balancing configuration task list .
Displaying Link Load Balancing Statistics
Select High Reliability > Load Balance > Link Load Balance > Outbound from the
navigation tree, and then click Statistics, and statistics of all the virtual services of link load balancing
are displayed on the page, including total number of connections, average of active connections/peak
of active connections, connection average rate/peak rate, number of forwarded/ignored packets in the
inbound direction, and number of forwarded packets in the outbound direction. If you click the link of a
virtual service name, the statistics of all the logical links of the virtual service will be displayed on the
lower part of the page, including total number of connections, average of active connections/peak of
active connections, connection average rate/peak rate, packets received, and packets sent, as shown in
Figure 39 .