H3C Technologies H3C SecPath F1000-E - Manual (Page 16)

15
Function menu Description User level
Displays the SYN flood detection
configuration of a specified
security zone, whether to discard
packets when the specified attack
is detected, and whether to send
the RESET packet to the attacked
host.
Monitor
SYN Flood
Allows you to add, modify, and
delete the SYN flood detection
configuration of a specified
security zone, configure whether
to discard packets when the
specified attack is detected, and
whether to send the RESET packet
to the attacked host.
Configure
Displays the connection number
limit configuration of a specified
security zone.
Monitor
Connection Limit
Allows you to modify the
connection number limit
configuration of a specified
security zone.
Configure
Displays the scanning detection
configuration of a specified
security zone.
Monitor
Scanning Detection
Allows you to modify the
scanning detection configuration
of a specified security zone.
Configure
Displays the URPF check
configurations for a specific
security zone.
Monitor
Allows you to configure URPF
check settings for a specific
security zone.
Configure URPF Check
Allows you to clear and refresh
URPF check settings for a specific
security zone.
Configure
Displays TCP proxy global
settings and status of TCP proxy
for a security zone.
Monitor
TCP Proxy Configuration
Allows you to configure TCP
proxy global settings and
enable/disable TCP proxy for a
security zone.
Configure
TCP Proxy
Protected IP Configuration
Displays information about
protected IP address entries and
the relative statistics.
Monitor