Figure 10 – H3C Technologies H3C SecPath F1000-E User Manual
Page 214
21
Figure 10 MSTP Port Configuration
describes the configuration items of configuring MSTP on a port.
Table 10 Configuration items of configuring MSTP on a port
Item
Description
Port Number
Port number
STP Status
Whether to enable STP on the port:
•
Enable: enables STP on the port.
•
Disable: disables STP on the port.
Protection Type
Type of protection enabled on the port:
•
Not Set: No protection is enabled on the port.
•
Edged Port, Root Protection, Loop Protection: Refer to
.
Point to Point
Specify whether the port is connected to a point-to-point link.
•
Auto: Automatically detects whether the link type of the port is point-to-point.
•
Force False: Specifies that the link type for the port is not point-to-point link.
•
Force True: Specifies that the link type for the port is point-to-point link.
Transmit Limit
Configure the maximum number of MSTP packets that can be sent during each
Hello interval.
The larger the transmit limit is, the more network resources will be occupied.
Therefore, H3C recommends that you the default value.