Configuring a static best performing link entry – H3C Technologies H3C SecPath F1000-E User Manual
Page 895
30
Item Description
TTL Weight
Time to live (TTL) weight in the dynamic best performing link algorithm
Bandwidth Weight
Bandwidth weight in the dynamic best performing link algorithm
Link Cost Weight
Link cost weight in the dynamic best performing link algorithm
Detection Interval
The interval at which best-performing link detection is performed.
Timeout
Timeout for each best-performing link detection operation
Inbound Type
For inbound link load balancing, allows you to obtain the detection type of the best
performing link parameters such as network delay and router hops, and configure the
detection parameters in health monitoring.
•
DNS: Detects the reachability of the remote address and obtains the best performing
link parameters through DNS packets.
•
ICMP: Detects the reachability of the remote address and obtains the best
performing link parameters through ICMP messages.
•
TCP Half Open: Detects the reachability of the remote address and obtains the best
performing link parameters through a TCP half open connection.
Hostname
Specifies the domain name to be resolved in DNS health monitoring if the inbound
detection type is DNS.
The default hostname is A.ROOT-SERVER.NET.
Host IP
Specifies the host IP if the inbound detection type is DNS.
A DNS health monitoring is considered successful only when the specified host IP
address is contained in the received DNS result packet if the host IP address is specified,
thus to enhance the precision of DNS health monitoring.
Outbound Type
For outbound link load balancing, allows you to obtain the detection type of the best
performing link parameters such as network delay and router hops, and configure the
detection parameters in health monitoring.
•
ICMP: Detects the reachability of the remote address and obtains the best
performing link parameters through ICMP messages.
•
TCP Half Open: Detects the reachability of the remote address and obtains the best
performing link parameters through a TCP half open connection.
Configuring a static best performing link entry
Select High Reliability > Load Balance > Link Load Balance > Best-Performing Link from
the navigation tree, and then click the Best Performing Link Table tab to enter the page as shown
in
. You can display all the dynamic and static best performing link entries in the best
performing link table. Click Add, and you can enter the page for creating a static best performing link
entry, as shown in
.