H3C Technologies H3C SecPath F1000-E - Manual (Page 860)

2
Configuring a Collaboration Group
Configuration Task List
Perform the tasks listed in Table 1 to configure a collaboration group.
Table 1 Collaboration group configuration task list
Task Remarks
Configuring a Collaboration
Group
Required
In this procedure, ports are assigned to a collaboration group.
Collaboration groups are not manually created. By default, there are 15
collaboration groups in the system. The group numbers are from 1 to 15.
By default, none of these collaboration groups contain any member port.
Displaying the Status of a
Collaboration Group and Its
Member Ports
Optional
Display the status of a collaboration group and its member ports
Configuring a Collaboration Group
Select High Reliability > Collaboration Group from the navigation tree to enter the page for
displaying collaboration groups, as shown in
Figure 2 . Click the icon corresponding to the
collaboration group you want to configure to enter the page for displaying and configuring the
collaboration group member ports, as shown in Figure 3 .