H3C Technologies H3C SecPath F1000-E - Manual (Page 189)

4
Figure 3 Add a MAC address entry
Table 1 shows the detailed configuration items of adding a MAC address entry.
Table 1 Configuration items for adding a MAC address entry
Item Description
MAC MAC address to be added
Type
Set the type of the MAC address entry, which can be:
• static: indicates static MAC address entries that never age out
• dynamic: indicates dynamic MAC address entries that will age out
• blackhole: indicates blackhole MAC address entries that never age out
IMPORTANT:
The types of the MAC address entries displayed in the tab are as follows:
z Config static: indicates static MAC address entries manually configured by
the users
z Config dynamic: indicates dynamic MAC address entries manually
configured by the users
z Blackhole: indicates blackhole MAC address entries
z Learned: indicates dynamic MAC address entries learned by the device
z Other: indicates types other than the ones mentioned above
VLAN ID of the VLAN to which the MAC address belongs
Port
Port to which the MAC address belongs. This configuration item is not required for
blackhole MAC address entries.
Setting the Aging Time for MAC Address Entries
Select Network > MAC > Setting from the navigation tree to enter the page for setting the MAC
address entry aging time, as shown in
Figure 4 .