H3C Technologies H3C SecPath F1000-E - Manual (Page 912)

47
Figure 50 Create ACL 3000
• Type the ACL number 3000.
• Click Apply.
• Click the icon of ACL 3000, and then click Add to perform the following configurations, as
shown in Figure 51 .
Figure 51 Configure rules for ACL 3000
• Select Permit from the Operation drop-down list.
• Select the Destination IP Address check box, and type the destination IP address 10.66.3.0
and destination wildcard 0.0.0.255.
• Click Apply.
# Create the physical link corresponding to ISP1.
• Select High Reliability > Load Balance > Link Load Balance > Physical Link from the
navigation tree and click Add to perform the following configurations, as shown in
Figure 52 .