H3C Technologies H3C SecPath F1000-E User Manual
Page 152
5
•
Select Firewall > ACL from the navigation tree, and then click Add. Create ACL 2000 as shown
in
.
Figure 4 Create an ACL
•
Type the ACL number 2000.
•
Select the match order Config.
•
Click Apply.
# Create a rule to allow Host A to access Device.
•
From the ACL list, select ACL 2000 and click the corresponding icon in the Operation column.
Then, click Add to enter the ACL rule configuration page. Create an ACL rule as shown in
.
Figure 5 Configure a rule to allow Host A to access Device
•
Select Permit from the Operation drop-down box.
•
Select the Source IP Address check box and type 192.168.1.2 and 0.0.0.0 respectively in the
following text boxes.
•
Click Apply.
# Create a rule to disable other hosts from accessing Device on Saturday and Sunday.
•
On the page displaying the rules of ACL 2000, click Add. Create an ACL rule as shown in
.