H3C Technologies H3C SecPath F1000-E - Manual (Page 547)

39
Figure 47 Configuration progress dialog box
• When OK appears, click Close.
# Create a behavior named af21_behav, and configure AF and set the minimum available bandwidth
for the behavior.
• On the page displaying behaviors, click Add. Perform configuration on the page shown in Figure
45 .
• Type af21_behav as the behavior name.
• Click Apply.
• Click the icon corresponding to af21_behav on the behavior list, and perform configuration
on the page shown in
Figure 46 .
• Select the Queue option.
• Select the AF option.
• Select the Percent option, and then type 5.
• Click Apply. The configuration progress dialog box as shown in Figure 47 appears.
• When OK appears, click Close.
# Create a behavior named ef_behav, and configure EF and set the maximum available bandwidth for
the behavior. For EF traffic, both bandwidth and delay are guaranteed.
• On the page displaying behaviors, click Add. Perform configuration on the page shown in Figure
45 .
• Type ef_behav as the behavior name.
• Click Apply.
• Click the icon corresponding to ef_behav on the behavior list, and perform configuration on
the page shown in Figure 46 .
• Select the Queue option.
• Select the EF option.
• Select the Percent option, and then type 30.
• Click Apply. The configuration progress dialog box as shown in Figure 47 appears.
• When OK appears, click Close.