Verify the configuration, N in, Figure 20 – H3C Technologies H3C SecPath F1000-E User Manual
Page 792
18
Figure 20 Request a certificate
•
Select torsa as the PKI domain.
•
Select Password and then type challenge-word as the password.
•
Click Apply. When the system displays “Certificate request has been submitted”, click OK to
confirm.
Verify the configuration
After the above configuration, select VPN > PKI > Certificate from the navigation tree, and then click
View Cert corresponding to the certificate of PKI domain torsa to view the certificate details, as shown
in
. You can also click View Cert corresponding to the CA certificate of PKI domain torsa to
view the CA certificate details.
This manual is related to the following products: