H3C Technologies H3C SecPath F1000-E - Manual (Page 458)

17
Figure 16 Configure ACL 2001 to prohibit other users to access the Internet
• Select Deny for Operation.
• Click Apply.
# Configure a NAT address pool.
• Select Firewall > NAT Policy > Dynamic NAT from the navigation tree, click Add, and then
perform the following operations, as shown in
Figure 17 .
Figure 17 Configure NAT address pool 0
• Type 0 in Index.
• Type 202.38.1.2 in Start IP Address.
• Type 202.38.1.3 in End IP Address.
• Click Apply.
# Configure dynamic NAT.
• Click Add in the Dynamic NAT field and perform the following operations, as shown in Figure
18 .