H3C Technologies H3C SecPath F1000-E - Manual (Page 337)

11
Figure 13 Display BGP peer information
Table 5 describes the BGP peer information.
Table 5 BGP peer information
Item Description
Peer IP Address IP address of the BGP peer.
Peer AS AS number of the BGP peer.
Version BGP version.
State Current state of the BGP peer.
Return to
BGP configuration task list .
BGP Configuration Example
Network requirements
In the following figure are all BGP devices. Between Device A and Device B is an eBGP connection. iBGP
speakers Device B, Device C, and Device D are fully meshed.
Figure 14 Network diagram for BGP configuration
Configuration procedure
Step1 Configure IP addresses for interfaces and configure security zones(omitted)
Step2 Configure iBGP connections
# Configure Device B.