H3C Technologies H3C SecPath F1000-E - Manual (Page 177)

2
Select Resource > Service > Customized Service from the navigation tree. All existing customized
service resources are displayed, as shown in
Figure 2 . Then, click Add to enter the customized service
resource configuration page, as shown in Figure 3 .
Figure 2 Customized service resource list
Figure 3 Customized service resource configuration page
Table 1 describes the configuration items for configuring a service resource.
Table 1 Customized service resource configuration items
Item Description
Name Specify the name for the customized service resource.
Description Describe the customized service resource in brief.
TCP Source Port
Specify the source TCP port range in the following two text boxes.
The two text boxes are available after you select TCP.
• If the values of the two text boxes are the same, a single port is specified.
• If the value of the second text box is greater than that of the first, a port range is
specified.
Note that the value of the second text box cannot be less than that of the first.