H3C Technologies H3C SecPath F1000-E - Manual (Page 905)

40
Table 16 Configuration items for DNS redirection
Item Description
Enable DNS Redirection Enables inbound link load balancing.
DNS TTL
TTL in a DNS response, which determines the duration that DNS resolution results
can be buffered by the client.
Return to
Inbound link load balancing configuration task list .
Configuring a DNS Entry
Select High Reliability > Load Balance > Link Load Balance > Inbound from the navigation
tree to enter the page as shown in
Figure 40 . In the DNS Table area, click Add to enter the page for
adding a DNS entry, as shown in Figure 41 .
Figure 41 Add a DNS entry
Table 17 describes the configuration items for adding a DNS entry.
Table 17 Configuration items for adding a DNS entry
Item Description
Domain Name Domain name for extranet accesses
IP Address
IP address corresponding to the domain name, that is, the IP address that extranet users
use to access the LB device.
Physical Link Physical link corresponding to the domain name
ACL
ACL of the DNS entry
To configure ACL rules, select Firewall > ACL.
Return to
Inbound link load balancing configuration task list .
Setting Health Monitoring Parameters
Select High Reliability > Load Balance > Health Monitor from the navigation tree to enter the
page as shown in
Figure 42 .