H3C Technologies H3C SecPath F1000-E - Manual (Page 535)

27
Priority Marking Configuration Example
Network requirements
As shown in Figure 29 , the enterprise network of a company interconnects hosts with servers through
Device. The network is described as follows:
• Host A and Host B are connected to GigabitEthernet 0/1 of Device.
• The data server, mail server, and file server are connected to GigabitEthernet 0/2 of Device.
Configure a priority marking QoS policy on Device to satisfy the following requirements:
Traffic source Destination Processing priority
Host A, B Data server High
Host A, B Mail server Medium
Host A, B File server Low
Figure 29 Network diagram for priority marking configuration
Configuration procedure
Step1 Configure ACLs
# Configure ACL 3000 to match packets with destination address 192.168.0.1.
• Select Firewall > ACL from the navigation tree and then click Add. Perform configuration on the
page as shown in
Figure 30 .
Figure 30 Create ACL 3000