H3C Technologies H3C SecPath F1000-E - Manual (Page 178)

3
Item Description
Destination
Port
Specify the destination TCP port range in the following two text boxes.
The two text boxes are available after you select TCP.
• If the values of the two text boxes are the same, a single port is specified.
• If the value of the second text box is greater than that of the first, a port range is
specified.
Note that the value of the second text box cannot be less than that of the first.
Source Port
Specify the source UDP port range in the following two text boxes.
The two text boxes are available after you select UDP.
• If the values of the two text boxes are the same, a single port is specified.
• If the value of the second text box is greater than that of the first, a port range is
specified.
Note that the value of the second text box cannot be less than that of the first.
UDP
Destination
Port
Specify the destination UDP port range in the following two text boxes.
The two text boxes are available after you select UDP.
• If the values of the two text boxes are the same, a single port is specified.
• If the value of the second text box is greater than that of the first, a port range is
specified.
Note that the value of the second text box cannot be less than that of the first.
Type
ICMP
Code
Specify the ICMP message type and code.
These items are available after you select ICMP.
Table 2 lists the ICMP message names and their corresponding message types and
codes.
Other
Protocol Protocol
Number
Specify the protocol to be carried by IP.
This item is available after you select Other Protocol and cannot be set to 1 (for
ICMP), 6 (for TCP), or 17 (UDP).
Table 2 ICMP message names and their corresponding message types and codes
ICMP message name Type Code
echo 8 0
echo-reply 0 0
fragmentneed-DFset 3 4
host-redirect 5 1
host-tos-redirect 5 3
host-unreachable 3 1
information-reply 16 0
information-request 15 0
net-redirect 5 0
net-tos-redirect 5 2
net-unreachable 3 0
parameter-problem 12 0
port-unreachable 3 3