H3C Technologies H3C SecPath F1000-E - Manual (Page 893)

28
Figure 27 Physical link
Figure 28 Add a physical link
Table 10 shows the configuration items for creating a physical link.
Table 10 Configuration items for creating a physical link
Item Description
Physical Link Name Set the physical link name, which uniquely identifies a physical link.
NextHop Specifies the IP address of the next hop corresponding to the physical link
Health Monitoring
Type
Health monitoring type of the physical link:
• ICMP: Detects the reachability of the next hop of the physical link through ICMP
messages.
• TCP Half Open: Detects the reachability of the next hop of the physical link through
a TCP half open connection.
BandWidth The maximum bandwidth allowed by the physical link
Cost Cost of the physical link
Return to
Outbound link load balancing configuration task list .
Return to Inbound link load balancing configuration task list .