H3C Technologies H3C SecPath F1000-E User Manual
Page 730
18
•
Select Firewall > ACL from the navigation tree, and then click Add. Create the ACL as shown in
.
Figure 23 Create ACL 3101
•
Type 3101 as the ACL number.
•
Select the match order of Config.
•
Click Apply.
•
From the ACL list, select ACL 3101 and click the corresponding icon. Then, click Add to enter the
ACL rule configuration page. Create an ACL rule as shown in
.
Figure 24 Configure a rule to permit packets from 10.1.1.0/24 to 10.1.2.0/24
•
Select Permit from the Operation drop-down box.
•
Select the Source IP Address check box and type 10.1.1.0 and 0.0.0.255 respectively in the
following text boxes.
•
Select the Destination IP Address check box and type 10.1.2.0 and 0.0.0.255 respectively
in the following text boxes.
•
Click Apply.
# Configure a static route to Host B.