Creating a virtual service – H3C Technologies H3C SecPath F1000-E User Manual
Page 883
18
Server load balancing configuration task list
.
Creating a Virtual Service
Select High Reliability > Load Balance > Server Load Balance from the navigation tree, and
then click Virtual Service to enter the page as shown in
. Click Add to enter the virtual
service configuration page.
Figure 19 Virtual service
TIP:
•
To view the configuration and statistics information of a real service, click the Real Service Name link of
the real service.
•
To view the configuration information of a real service group, click the Real Service Group link of a
virtual service.
•
If you click the Number of Real Services link of a real service group, the page will go to the Real Service
tab page, which displays only the information about the real services that belong to the virtual service
group.
Creating a virtual service for Layer 4 server load balancing
To configure a virtual service for Layer 4 server load balancing, you need to select Four for LB Layer.
In this case, the page for creating a virtual service is as shown in
.