H3C Technologies H3C SecPath F1000-E - Manual (Page 291)

6
Return to
RIP configuration task list .
Configuring Interface RIP
Select Network > Routing Management > RIP from the navigation tree to enter the RIP
configuration page. If RIP is enabled, the More button is displayed. Click More to display the hidden
RIP interface list, as shown in
Figure 5 . Then, click the icon to enter the configuration page of the
specified RIP interface, as shown in Figure 6 .
Figure 5 Interface configuration page
Figure 6 RIP interface configuration page
Table 3 describes the RIP interface configuration items.
Table 3 RIP interface configuration items
Item Description
Interface Displays the RIP interface name