H3C Technologies H3C SecPath F1000-E - Manual (Page 87)

8
Figure 7 Create VLAN-interface 1
• Set the interface name to Vlan-interface1.
• Select Static Address for the IP Config item.
• Enter IP address 1.1.2.1.
• Select 24 (255.255.255.255) as the network mask.
• Click Apply.
# Assign VLAN-interface 1 to a security zone (depending on the network environment), for example,
security zone Trust.
• Select Device Management > Zone from the navigation tree, click the icon corresponding to
zone Trust, and make the following configurations, as shown in
Figure 8 .