Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 846
17
Figure 15 Network diagram for multiple VRRP groups configuration
Configuration procedure
Step1
Configure Device A
# Configure the IP address of each interface and the zones. The detailed configuration is omitted here.
# Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.111.
•
Select High Availability > VRRP from the navigation tree to enter the VRRP interfaces page.
Click the icon corresponding to GigabitEthernet 0/1 to enter the VRRP Configuration on
Interface page shown in
.
Figure 16 Create VRRP group 1
•
Type 1 in the VRID text box.
•
Type 202.38.160.111 in the Virtual IP text box and click Add to add the virtual IP address to
the Virtual IP Members text box.
•
Click Apply.
# Create VRRP group 2 on GigabitEthernet 0/1 and configure the virtual IP address as 202.38.160.112.
•
On the VRRP group page of GigabitEthernet 0/1, click Add to enter the page shown in
.