Configuring a peer node – H3C Technologies H3C SecPath F1000-E User Manual
Page 65
8
Item
Description
Pre-Shared Key
PKI Domain
Select the authentication method for IKE negotiation and specify the required
argument.
•
Pre-Shared Key: Uses the pre-shared key authentication method.
•
PKI Domain: Uses the RSA signature authentication method. Available PKI
domains are those configured by selecting VPN > PKI > Domain from the
navigation tree.
Enable DPD
Select this check box to enable dead peer detection (DPD).
IMPORTANT:
If you enable DPD and the name of the IPsec VPN is abc, the wizard will create a
DPD named abc_dpd and apply it to peer abc_peer.
Step5
Click Next to enter the next page, as shown in
.
Figure 9 IPsec VPN policy configuration wizard: 4/4 (branch node)
Step6
Click Finish to complete the configuration. The system will jump to the page that you can enter by
selecting VPN > IPSec > IPSec Application from the navigation tree.
Configuring a Peer Node
Step1
Select Peer Node from the first page of the IPsec VPN policy configuration wizard and then click Next
.