H3C Technologies H3C SecPath F1000-E - Manual (Page 169)

4
Configuring a Subnet Address Resource
Select Resource > Address > IP Address from the navigation tree, and click the Subnet tab to
enter the subnet address resource list page, as shown in
Figure 5 . Then, click Add to enter the subnet
address resource configuration page, as shown in Figure 6 .
Figure 5 Subnet address resource list
Figure 6 Subnet address resource configuration page
Table 3 describes configuration items for configuring a subnet address resource.
Table 3 Subnet address resource configuration items
Item Description
Name Specify the name for the subnet address resource.
Description Describe the subnet address resource in brief.
IP/Wildcard Specify an IP address and a wildcard to define an address range.